Firewall Wizards: Cisco 2 inside/2 outside selective redirect

From: Tuc at T-B-O-H.NET <ml_at_t-b-o-h.net>
Date: Fri, 28 Mar 2008 23:28:56 -0400 (EDT)

Hi,

I've got a Cisco running 12.4(19) (Only train I can run, sorry).
I'd like to redirect all requests on port 80 out Ethernet 1/0 to
192.168.0.1 port 87.

I can't use "ip nat outside source X" since "pool" is the
only option after the access list / route map / etc. Is this image
just too limited?

Thanks, Tuc

interface Ethernet0/0
description WIRELESS T-1
ip address 192.168.75.49 255.255.255.0
ip wccp web-cache redirect out
ip nat outside
ip virtual-reassembly
half-duplex
!
interface Ethernet0/1
description BRIDGE FOR 2924-1
no ip address
half-duplex
bridge-group 1
!
interface Ethernet1/0
description SATELLITE
ip address 192.168.0.3 255.255.255.0
ip nat outside
ip virtual-reassembly
half-duplex
!
interface Ethernet1/1
description BRIDGE FOR 2924-2
no ip address
half-duplex
bridge-group 1
!
interface BVI1
description BRIDGE of 2924's for gateway
ip address 192.168.3.254 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip nat inside source route-map SATELLITE interface Ethernet1/0 overload
ip nat inside source route-map WIRELESS interface Ethernet0/0 overload
!
route-map SATELLITE permit 10
match interface Ethernet1/0
!
route-map WIRELESS permit 10
match interface Ethernet0/0

_______________________________________________
firewall-wizards mailing list
firewall-wizards_at_listserv.icsalabs.com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards
Received on Mar 28 2008