Home page logo
/

fulldisclosure logo Full Disclosure mailing list archives

Re: info on ip spoofing please
From: Brandon Enright <bmenrigh () ucsd edu>
Date: Tue, 11 Apr 2006 20:42:21 +0000

On Tue, 2006-04-11 at 20:37 +0100, Ian stuart Turnbull wrote:
Hello all,
At 
http://www.iss.net/security_center/advice/Underground/Hacking/Methods/Technical/Spoofing/default.htm

was this comment :-

QUOTE "
Examples of spoofing:

man-in-the-middle
packet sniffs on link between the two end points, and can therefore pretend 
to be one end of the connection "

My question is How can you sniff packets on a link that your machine is NOT 
on ie NOT on the same subnet??

Why am I at a loss to understand this. Is there a command/software that 
allows one to
say: sniff packets on port x of IP xxx.xxx.xxx.xxx ?

Please put me out of my agony on this.
Thanks for any info you can give.

Ian t


In general you can not arbitrarily monitor the traffic of any random
host.  If the host you are trying to attack is not relatively local
there is little to no chance you'll be able to sniff the traffic.

For more local hosts though, if you can directly influence the network
devices separating you from your victim there is a chance you will be
able to redirect traffic for an attack.

The two more common methods for performing MITM attacks are ARP spoofing
and Spanning Tree spoofing.  Several tools can perform ARP poisoning
(ettercap comes to mind).  There is an excellent overview of attacks
with Spanning Tree in Cisco's _Network Security Architectures_ (ISBN:
1-58705-115-X).

If you goal isn't to modify the stream for a MITM attack but just watch
the traffic, CAM table flooding can reduce the switch/vLAN to the
behavior of a hub.

For a discussion of all of these attacks see 
http://www.rootsecure.net/content/downloads/pdf/layer2sniffing.pdf

All that being said, it still may not be possible to manipulate the
network in any useful way.  Cisco and other vendors have mechanisms that
can be turned on for most of their devices that detect and prevent many
or all of the above attacks.

For those with Cisco devices looking to protect against said attacks,
limiting the number of MACs per port and turning on BPDU Guard
(http://www.cisco.com/warp/public/473/65.html) is typically all that
needs to be done.

Regards,

Brandon

-- 
Brandon Enright
Network Security Analyst
UCSD ACS/Network Operations
bmenrigh () ucsd edu

_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.grok.org.uk/full-disclosure-charter.html
Hosted and sponsored by Secunia - http://secunia.com/


  By Date           By Thread  

Current thread:
[ Nmap | Sec Tools | Mailing Lists | Site News | About/Contact | Advertising | Privacy ]