Home page logo
/

fulldisclosure logo Full Disclosure mailing list archives

Re: Tempest today
From: <daylasoul () hush com>
Date: Sun, 20 Aug 2006 01:44:42 -0500

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Sat, 19 Aug 2006 18:49:09 -0500 Bipin Gautam
<gautam.bipin () gmail com> wrote:
Ok, here is something from the book that I was trying to
assemble/write.

Some Links: http://www.eskimo.com/~joelm/tempest.html
http://www.erikyyy.de/tempest/

Lets begin…

Faraday cages may be used to provide protection from HERF and EMP
effects.

Countermeasures:
It is easy to defeat ordinary audio eavesdropping, just by
sound-proofing a room. And simply drawing the curtains or creating
a
specially crafted background noise or by using double glass with
air
gap in the middle can soundproof and can defeat newer systems,
which
shine a laser beam onto a glass window and decode any modulation of
the reflected beam caused by sound vibrations in the room.

Faraday's cage: The charge on a charged conductor resided only on
its
exterior, and had no influence on anything enclosed within it. To
demonstrate this fact he built a room coated with metal foil, and
allowed high-voltage discharges from an electrostatic generator to
strike the outside of the room. He used an electroscope to show
that
there was no electric charge present on the inside of the room's
walls. A Faraday cage is best understood as an approximation to an
ideal hollow conductor. A round drum, sphere etc can act like a
Faraday's Cage. Basically, the enclosure may be made of an unbroken
conducting sheet, like the metal box surrounding a sensitive radio
receiver, or a wire mesh, like that in the door of a microwave
oven.
Any holes in the box or mesh must be significantly smaller than the
wavelength of the radiation that is being kept out, or the
enclosure
will not effectively approximate an unbroken conducting surface.

This shielding effect is used to eliminate electric fields within a
volume, for example to protect electronic equipment from lightning
strikes and other electrostatic discharges (ESDs). Faraday cages
are
often put to a dual purpose: to block electric fields, as explained
above, and to block electromagnetic radiation. The latter
application
is known as RF shielding.

Some traditional architectural materials act as Faraday shields in
practice. These include plaster with wire mesh, and rebar concrete.
These will affect the use of cordless phones and wireless networks
inside buildings and houses. While Some buildings have designs that
block radio signals by accident due to thick concrete walls or a
steel
skeleton.
RF and Magnetic shielding: Radio frequency (or RF) shielding is
required when it is necessary to block high frequency - 100
kilohertz
and above - interference fields. These shields typically use
copper,
aluminum, galvanized steel, or conductive rubber, plastic or
paints.
These materials work at high frequencies by means of their high
conductivity, and little or no magnetic permeability. Magnetic
shields
use their high permeability to attract magnetic fields and divert
the
magnetic energy through them. With proper construction, magnetic
shielding alloys have the ability to function as broadband shields,
shielding both rf and magnetic interference fields.

Electromagnetic shielding: It is the process of limiting the
coupling
of an electromagnetic field between two locations. Typically it is
applied to enclosures, separating electrical content from the
outside
world, and to cables, separating internal wires from the
environment
the cable runs through. The shielding is achieved using a
conductive
material as a barrier. Typical materials include sheet metal, metal
mesh, ionized gas, plasma and aluminum foil. The shielding can
reduce
the coupling of radio waves, visible light, electromagnetic fields
and
electrostatic fields. The amount of reduction depends very much
upon
the material used, the method of connection of the shield (or
screen)
and the frequency of the fields of interest. One example is a
coaxial
cable, which has electromagnetic shielding in the form of a wire
mesh
surrounding an inner core conductor. The shielding impedes the
escape
of any signal from the core conductor, and also signals from being
added to the core conductor.

Though i have practically seen putting a dipole near the coaxial
cable
can sniff its signal within despite the sealing. The rf sealing
strict
depends on the quality which i've seen is rare in MOST commercial
products for general uses.

Shielded Tent: It Shielded enclosures, tempest equipment, shielded
chambers Another way of making sure you are not being bugged is to
use
a shielded tent, which prevents radio waves entering or leaving.
Though Mobile phone calls are impossible from inside the tent, but
no-one will be able to listen to your conversations using bugs or
radio wave listening devices. It will also prevent anyone
intercepting
radio emissions from computers, preventing them from seeing what
you
have on screen. A more sophisticated - and expensive - method is to
build a "clean room", of the type used by the military, to shield
radio waves and electromagnetic signals.

Wireless Shielding Paint: A company, Force Field Wireless makes
three
products that it says can dramatically reduce the leakage of
wireless
signals from a room or building. The paint contains copper filings
and
an aluminum compound. When spread evenly on a wall, the paint
reflects
signals in frequencies from 100 MHz to 5 GHz. Paint four walls, a
floor, and a ceiling, and you effectively have a Faraday cage,
which
is a specially constructed metal room that blocks all radio
signals in
or out. It also makes copper/aluminum powder that homeowners can
add
to their own paint. The company also makes a window film that cuts
down on signal leakage. This product DefendAir would be an
attractive
option to
protect an RFID-enabled warehouse.
http://news.thomasnet.com/fullstory/459490/3280

Critic: Though wireless signals are very hard to completely block.
They will simply radiate over and around obstacles. Metallic paint
might reduce the signal strength, but that's easily compensated
for by
an antenna. Further-more its drawbacks are like it could reduce
cellular reception. Any such technology won't block all signal - it
won't block signal eminating from windows, doors, and screw holes.
What it will do is lower the range from which you can sniff or
connect, with constant equipment, which is plenty to be useful for
some cases. Like a building situated near the center of a military
base. Up to a quarterkilometer away is secured area. But obviously
it
will help you lower the sniffable range of the radiation to
within that security perimeter and it's possible to arrange any
conductive medium to actually amplify RF signals in a given
direction
You are quite likely to find a spot where the signal is
considerably
stronger.

Please help make the list self-policing.  Follow the list charter
and note that self-promotion is forbidden.
-----BEGIN PGP SIGNATURE-----
Note: This signature can be verified at https://www.hushtools.com/verify
Version: Hush 2.5

wpwEAQECAAYFAkToBNoACgkQ3AEcWsxdEQ7SnQP/YflwvtDbAqqwCUSlV9C4c/j0IWKN
H21qXsV7BGz9R7R2Fyv2yfoLuTDOgCkZzf8zboW/NZmOk+E52j46ZJhEBSNNOD/uRmC1
R/oSe6S43IZKPfz7o9aN00WKacZCehN1JvNghHxQxwzqqyJQO0Wgw/oklzEjJMl2iZtX
LJ/hESM=
=I2dh
-----END PGP SIGNATURE-----




Concerned about your privacy? Instantly send FREE secure email, no account required
http://www.hushmail.com/send?l=480

Get the best prices on SSL certificates from Hushmail
https://www.hushssl.com?l=485

_______________________________________________
Full-Disclosure - We believe in it.
Charter: http://lists.grok.org.uk/full-disclosure-charter.html
Hosted and sponsored by Secunia - http://secunia.com/


  By Date           By Thread  

Current thread:
[ Nmap | Sec Tools | Mailing Lists | Site News | About/Contact | Advertising | Privacy ]