Home page logo
/

nanog logo nanog mailing list archives

Re: MAE-East snafu redux
From: Jan Czmok <czmok () ipf de>
Date: Wed, 22 Apr 1998 01:16:43 +0200

Well, from our router (1292.41.177.103, catalyst 6) it looks like this (note
the packet loss!!!)

Jan


There the pings:

core0.mae-east#ping 192.41.177.181

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.181, timeout is 2 seconds:
.!.!!
Success rate is 60 percent (3/5), round-trip min/avg/max = 100/189/268 ms
core0.mae-east#ping 192.41.177.181

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.181, timeout is 2 seconds:
!!!.!
Success rate is 80 percent (4/5), round-trip min/avg/max = 4/13/20 ms
core0.mae-east#ping 192.41.177.113

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.113, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/11/16 ms
core0.mae-east#ping 192.41.177.101

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.101, timeout is 2 seconds:
.!.!!
Success rate is 60 percent (3/5), round-trip min/avg/max = 4/8/12 ms
core0.mae-east#ping 192.41.177.101

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.101, timeout is 2 seconds:
.!!!.
Success rate is 60 percent (3/5), round-trip min/avg/max = 1/28/44 ms
core0.mae-east#ping 192.41.177.73

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.73, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 12/17/24 ms
core0.mae-east#ping 192.41.177.119

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.119, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/19/24 ms
core0.mae-east#ping 192.41.177.69

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.41.177.69, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms
---


Jeremiah Kristal wrote:

Has everyone just become so used to terrible performace at MAE-East, or am
I the only one seeing problems?  I'm seeing perfect performance to
networks connected to Gigaswitch 1 (excluding overloaded ports), but
15-20% packet loss to anyone connected to any other Gigaswitch.  In the
past MFS would jump on these tickets, find a frozen card on Gigaswitch 6,
reset it, and clear the trouble.  It has been over 24 hours since I opened
a ticket, I've spoken with MFS Datanet Engineering, and I still don't
think I've spoken to anyone at MFS who is aware that all traffic between
Gigaswitches goes through Giga6.
If anyone has time tonight, could they check performance to other
providers on the same Gigaswitch and on other Gigas.  If you need to know
which provider is on which switch, go to
http://www.mfsdatanet.com:80/MAE/east.map.html
Thanks, and hopefully this is on topic, even if it doesn't contain actual
router commands.  :)

Jeremiah Kristal
Senior Network Engineer
ICon CMT Corporation
jeremiah () iconnet net
201-319-5764
x284 internal





  By Date           By Thread  

Current thread:
[ Nmap | Sec Tools | Mailing Lists | Site News | About/Contact | Advertising | Privacy ]