Home page logo
/

nanog logo nanog mailing list archives

Re: Traffic Shapping
From: "Natambu Obleton" <no () frontier net>
Date: Mon, 27 Apr 1998 13:05:29 -0600

In this situation I am about to implement data over a private fiber network
in my town. Many businesses are planning to connect to this private fiber
network for internet access and I want to sell Fractional usage on this
private fiber network in 128k increments. I want to only limit their speed
to the outside world, allowing them full Ethernet speed over the fiber to
our local mail and proxy servers. We plan to use a cabletron switch to
connect about 30-40 pairs of fiber to our network. That switch will be going
FDDI back to my noc.

So the best place to limit this is at the router where my internet
connection comes in. Which is currently a Cisco 3640. I have thought about
using a Aponet or Xedia box in between my FDDI switch and the router, but I
would rather to the shaping on the router if possible. We would need to
traffic shape up to 30-40 Ethernet speed users and 15-20 wireless users in
the area. From the talk on this list about this, I do not think my Cisco
router can do it. I will probably go ahead with an Aponet or Xedia solution.
--
Natambu Obleton - Network Administrator - Frontier Internet Inc.
970 385 4177 - fax: 970 385 6745 - http://www.frontier.net
777 Main St. - Suite #201 - Durango - Colorado - 81301 - USA
-----Original Message-----
From: Ehab Hadi <ehabh () hotmail com>
To: nanog () merit edu <nanog () merit edu>; no () frontier net <no () frontier net>
Date: Friday, April 24, 1998 11:15 PM
Subject: Re: Traffic Shapping


Natambu,
Can you please specify what platform that you are using? any why
you like to do the traffic shaping on the Ethernet which is
suppositly 10 Mbps?

Ehab Hadi
Northern Telecom
Interprise Networks
Ottawa, ON K1Y 4H7
Canada
ehabh () hotmail ca


From owner-nanog () merit edu Fri Apr 24 09:59:44 1998
Received: from localhost (daemon () localhost)
by merit.edu (8.8.7/8.8.5) with SMTP id MAA27417;
Fri, 24 Apr 1998 12:51:49 -0400 (EDT)
Received: by merit.edu (bulk_mailer v1.5); Fri, 24 Apr 1998 12:50:49
-0400
Received: (from majordom () localhost)
by merit.edu (8.8.7/8.8.5) id MAA27342
for nanog-outgoing; Fri, 24 Apr 1998 12:50:48 -0400 (EDT)
Received: from home.merit.edu (home.merit.edu [198.108.60.42])
by merit.edu (8.8.7/8.8.5) with ESMTP id MAA27334
for <nanog () merit edu>; Fri, 24 Apr 1998 12:50:43 -0400 (EDT)
Received: (from ljb () localhost) by home.merit.edu (8.8.8/merit-2.0) id
MAA04749 for nanog () merit edu; Fri, 24 Apr 1998 12:50:43 -0400 (EDT)
Received: from animas.frontier.net (root () frontier net [199.45.141.1])
by merit.edu (8.8.7/8.8.5) with ESMTP id MAA27293
for <nanog () merit edu>; Fri, 24 Apr 1998 12:49:01 -0400 (EDT)
Received: from hermosa (hermosa [199.45.141.59])
by animas.frontier.net (8.8.8/8.8.8) with SMTP id KAA20190
for <nanog () merit edu>; Fri, 24 Apr 1998 10:48:50 -0600
Message-ID: <00f301bd6fa1$4fdd1a70$3b8d2dc7 () hermosa frontier net>
From: "Natambu Obleton" <no () frontier net>
To: <nanog () merit edu>
Subject: Re: Traffic Shapping
Date: Fri, 24 Apr 1998 10:52:04 -0600
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook Express 4.72.2106.4
X-MimeOLE: Produced By Microsoft MimeOLE V4.72.2106.4
Sender: owner-nanog () merit edu

I am looking to do the shaping on Ethernet Interfaces for a large fiber
plant. I have been looking the solution by Aponet. Anyone out there
used it?
I believe it is what above.net uses.

--
Natambu Obleton - Network Administrator - Frontier Internet Inc.
970 385 4177 - fax: 970 385 6745 - http://www.frontier.net
777 Main St. - Suite #201 - Durango - Colorado - 81301 - USA
-----Original Message-----
From: Alex P. Rudnev <alex () Relcom EU net>
To: Natambu Obleton <no () frontier net>
Cc: nanog () merit edu <nanog () merit edu>
Date: Friday, April 24, 1998 10:33 AM
Subject: Re: Traffic Shapping


Hmm, it depends of what do you mean as _successfully_ -:).

It works, but creates some bugs under heavy conditions.



On Thu, 23 Apr 1998, Natambu Obleton wrote:

Date: Thu, 23 Apr 1998 17:51:16 -0600
From: Natambu Obleton <no () frontier net>
To: nanog () merit edu
Subject: Traffic Shapping

Has anyone here successfully implement the traffic shaping option on
a
Cisco
router?
--
Natambu Obleton - Network Administrator - Frontier Internet Inc.
970 385 4177 - fax: 970 385 6745 - http://www.frontier.net
777 Main St. - Suite #201 - Durango - Colorado - 81301 - USA




Aleksei Roudnev, Network Operations Center, Relcom, Moscow
(+7 095) 194-19-95 (Network Operations Center Hot Line),(+7 095)
239-10-10,
N 13729 (pager)
(+7 095) 196-72-12 (Support), (+7 095) 194-33-28 (Fax)






______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com





  By Date           By Thread  

Current thread:
[ Nmap | Sec Tools | Mailing Lists | Site News | About/Contact | Advertising | Privacy ]