Home page logo
/

nanog logo nanog mailing list archives

Re: Transit LAN vs. Individual LANs
From: Mark Smith <random () 72616e646f6d20323030342d30342d31360a nosense org>
Date: Sun, 26 Feb 2006 08:41:45 +1030



On Sat, 25 Feb 2006 13:56:37 -0600
"Stephen Sprunk" <stephen () sprunk org> wrote:


Thus spake "Patrick W. Gilmore" <patrick () ianai net>
On Feb 24, 2006, at 9:03 PM, Scott Weeks wrote:

<snip>


There are a few advantages to going with PTP VLANs, such as eliminating 
DR/BDR elections needed on shared ones, but you'd need 10 of them to get a 
full mesh, and 15 if you add one more router.  That's just too much 
complexity for virtually no gain, and as Owen notes, it is generally bad for 
your logical topology to not match the physical one.


Even if you have a small number of routers on a segment, you can set the
ethernet interface type to point-to-multipoint, at least on Ciscos.

Automatic nighbour discovery via multicast hellos still happens, the
difference is that the routers establish direct adjacencies between each
other, rather than with the DR. While this costs additional RAM, and CPU
during the SPF calc, the benefit of avoiding DR/BDR elections, and the
'DR/BDR' approximately 40 second listening phase when a third and
subsequent routers come online may be well worth those costs.

I've also found you can set the OSPF interface type on ethernets to
point-to-point. From memory, it results in a slightly smaller Router LSA
than point-to-multipoint. That probably doesn't matter much. I haven't
tested it, however setting the type to point-to-point might prevent a
third OSPF router being accidentally added to the segment and then
establishing an unwanted adjacency, which might provide a robustness
against human error advantage.

Regards,
Mark.

-- 

        "Sheep are slow and tasty, and therefore must remain constantly
         alert."
                                   - Bruce Schneier, "Beyond Fear"


  By Date           By Thread  

Current thread:
[ Nmap | Sec Tools | Mailing Lists | Site News | About/Contact | Advertising | Privacy ]