Home page logo
/

nanog logo nanog mailing list archives

Re: NANOG Digest, Vol 43, Issue 53
From: Leigh Porter <leigh.porter () ukbroadband com>
Date: Sat, 20 Aug 2011 18:52:30 +0000

Why not use wireless for it all if the bandwidth is enough. 5.8ghz kit is pretty cheap and fast.

-- 
Leigh Porter


On 20 Aug 2011, at 04:16, "Frank Bulk" <frnkblk () iname com> wrote:

You can order custom-made patch cables that are outdoor rated from any
decent company that sells fiber patch cables for a living.  If you want it
to be locatable, make sure it includes some kind of metal strip.

Here's some pre-made armored options: 
http://goo.gl/sJ9NQ
http://www.jemcables.com/ecommerce/CatalogSubCategoryDisplay.aspx?CID=101
http://www.macmall.com/p/Cables-To-Go-Cables/product~dpno~7910804~pdp.fhcjje
i

You can also lay sealed PVC conduit and run indoor-rated cable if you keep
it below the frost line.

Frank

-----Original Message-----
From: Dorn Hetzel [mailto:dorn () hetzel org] 
Sent: Saturday, August 13, 2011 6:54 AM
To: nanog () nanog org
Subject: Re: NANOG Digest, Vol 43, Issue 53

I live on a farm and I have a number of data runs between buildings that are
copper ethernet pulled through buried conduits.  (It was what I could afford
when I put it in).  We have trouble from time to time with damage from
lightning. (I've taken to using an intermediate "throwaway" 5-port switch
after the surge suppressors on the cable after building entry, but still
stuff gets blown up now and then.  The longer runs of outside ethernet have
one or more toadstools with small switches used as repeaters in the middle.


Well, I would like to convert the whole outside mess to fiber to eliminate
this problem, and the per-foot price of 6 or 12 strand single mode cables is
pretty reasonable nowadays...  But, I'm not very current on the most
economical methods for splicing and terminating the fiber, which of course I
would need to do on a "personal" sized budget.  Any suggestions?

On Sat, Aug 13, 2011 at 12:16 AM, Charles N Wyble
<charles () knownelement com>wrote:

On 08/12/2011 08:53 PM, Alex Rubenstein wrote:


.
Trust me, if I could, I would certainly do dark to my house.

The last house I was in, was 500 feet from AT&T fiber and easy walking
distance to the CO. My sister in law lives there now. I'm considering
putting a rack or two in the garage for disaster recovery purposes.



Been there, done that, in the current home. Two MDF's, upstairs. I hate
it. For the cost (not much) going to home run everything. Ethernet, coax,
speakers, etc.

Nice. Please write this up. I want to do the same. Hoping I can rack
mount everything and have an epic setup. Every room would have ethernet
drop, coax, speaker. What about video? Hmmm. What about fiber drop in
every room as well?








______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


  By Date           By Thread  

Current thread:
[ Nmap | Sec Tools | Mailing Lists | Site News | About/Contact | Advertising | Privacy ]
AlienVault