mailing list archives
Re: IPv6 RA vs DHCPv6 - The chosen one?
From: Masataka Ohta <mohta () necom830 hpcl titech ac jp>
Date: Thu, 29 Dec 2011 10:40:51 +0900
Leo Bicknell wrote:
Moble networks do not today, and should not in the future expose
those handoffs to the IP layer. Even WiFi networks are moving from
the per-cell (AP) model you describe to a controller based
infrastructure that seeks to avoid exposing L3 changes to the client.
The reality in Japan today is that each AP used by smart
phones to bypass traffic from 3G to the Internet is
independently provided by small shops or individuals'
households through their own Internet connectivity, there
can be no central controller.
You do not want to get a new L3 address every 3.6 seconds. Worse,
if in the case of VoIP you need a cell handoff to take< 25ms or
so, which could never happen with new L3 addresseing and then
renegotating the session to a new L3 address.
As voice traffic is negligible, I think it is carried over
But, if you seriously need smooth handover, you must have
2 independent WLAN receivers to simultaneously connect to
two APs operating at different channels for make-before-break
style handover. Or, another possibility is to use only a single
channel of WLAN by all the related APs (Packet Division
Multiple Access (PDMA)).
I have confirmed both approaches work combined with IP mobility
with applications of voice and video over IP.
Moble networks are designed to provide a L1/L2 fast switching path
back to a controller infrastructure which then provides the L3
handoff. This properly decouples the layers and allows normal LAN
based timing for the L3 system.
What's happening today is migration from 3G/4G to WLAN.
Re: IPv6 RA vs DHCPv6 - The chosen one? Glen Kent (Dec 20)
Re: IPv6 RA vs DHCPv6 - The chosen one? Ray Soucy (Dec 21)
Re: IPv6 RA vs DHCPv6 - The chosen one? Kevin Loch (Dec 22)