mailing list archives
Re: time sink 42
From: Karl Auer <kauer () biplane com au>
Date: Fri, 17 Feb 2012 09:04:49 +1100
On Thu, 2012-02-16 at 13:08 -0800, Randy Bush wrote:
an horrifyingly large
amount of my time was spent trying to peel apart labels made on my
portable brother label tape maker
is there a trick?
Some tapes have a split backing; bend the tape along the long axis and
you can peel off both halves very easily.
If you can't find such tape for your model of label maker, you will need
fingernails and either a very good sense of touch or good eyesight.
Fold one of the corners of the label, just a tiny corner, back towards
the backing paper, then forward. The backing paper will come off that
tiny corner. Use the aforementioned fingernails to get under the label
at that point. It's usually easier to grip the label than the backing
paper, because the label is a little sticky underneath.
Some people say you should fold forward then back. Some people use a
penknife instead of a fingernail.
Another technique, that I've never been able to master: Hold the label,
backing towards you, about a centimetre from the cut end, place the cut
end at right angles against and across the underside of your right
forefinger, pressing very lightly, and drag your finger down. Done
right, the backing peels off and curls down your finger.
Both techniques rely on the label being slightly stiffer than the
backing paper, and thus bending less.
Karl Auer (kauer () biplane com au)
GPG fingerprint: AE1D 4868 6420 AD9A A698 5251 1699 7B78 4EEE 6017
Old fingerprint: DA41 51B1 1481 16E1 F7E2 B2E9 3007 14ED 5736 F687
Description: This is a digitally signed message part
RE: time sink 42 Scott Berkman (Feb 16)
Re: time sink 42 david raistrick (Feb 16)
- Re: time sink 42, (continued)