Re: PIX 515E 7.2 Duplex problem

[robbie.jacka () regions com]

Running PIX 7? I've run into this issue when using PIX7 on a 525 using a
straight through cable to a CSS11503. 100FD hardcoded on both ends results
in the firewall 'negotiating' to half-duplex, but putting both sides in
auto results in 100FD with no issues.
--
robbie



                                                                           
             vbwilliams () neb rr                                             
             .com                                                          
             Sent by:                                                   To 
             firewall-wizards-         Firewall Wizards Security Mailing   
             bounces@listserv.         List                                
             icsalabs.com              <firewall-wizards@listserv.cybertru 
                                       st.com>                             
                                                                        cc 
             04/19/2007 03:27          firewall-wizards@listserv.cybertrus 
             PM                        t.com                               
                                                                   Subject 
                                       Re: [fw-wiz] PIX 515E 7.2 Duplex    
             Please respond to         problem                             
             vbwilliams () neb rr                                             
               .com; Please                                                
                respond to                                                 
             Firewall Wizards                                              
             Security Mailing                                              
                   List                                                    
             <firewall-wizards                                             
             @listserv.icsalab                                             
                  s.com>                                                   
                                                                           
                                                                           




Only time I've experienced it was when we had a bad NIC.  Did you try
doing the same thing on another interface?

----- Original Message -----
From: "Drumheller, Michael" <mdrumhel () harris com>
Date: Thursday, April 19, 2007 1:05 pm
Subject: [fw-wiz] PIX 515E 7.2 Duplex problem
To: firewall-wizards () listserv cybertrust com

> The interface on the PIX shuts down when duplex is changed from
> auto to
> full.  The switch it connects to is configured for full duplex but the
> PIX still shows half duplex when in auto negotiate mode.  Changing to
> half duplex on both the switch and PIX works but the PIX interface
> goesdown when it's changed to full duplex.  Has anyone else
> experienced this
> problem?
_______________________________________________
firewall-wizards mailing list
firewall-wizards () listserv icsalabs com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards



_______________________________________________
firewall-wizards mailing list
firewall-wizards () listserv icsalabs com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards