Windows Vista: Command: nmap -sn -sP -d --privileged --script http-robtex-shared-ns scanme.nmap.org Starting Nmap 6.47 ( http://nmap.org ) at 2014-10-01 13:25 RTZ 2 (ûõªþ) Winpcap present, dynamic linked to: WinPcap version 4.1.3 (packet.dll version 4.1.0.2980), based on libpcap version 1.0 branch 1_0_rel0b (20091008) --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. NSE: Script Arguments seen from CLI: NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating Ping Scan at 13:25 Scanning scanme.nmap.org (74.207.244.221) [4 ports] Packet capture filter (device eth0): dst host 192.168.2.199 and (icmp or icmp6 or ((tcp or udp or sctp) and (src host 74.207.244.221))) We got a TCP ping packet back from 74.207.244.221 port 80 (trynum = 0) Completed Ping Scan at 13:26, 0.76s elapsed (1 total hosts) Overall sending rates: 5.27 packets / s, 200.26 bytes / s. mass_rdns: Using DNS server 8.8.8.8 mass_rdns: Using DNS server 8.8.8.8 mass_rdns: Using DNS server 192.168.0.1 Initiating Parallel DNS resolution of 1 host. at 13:26 mass_rdns: 19.20s 0/1 [#: 3, OK: 0, NX: 0, DR: 0, SF: 0, TR: 3] Completed Parallel DNS resolution of 1 host. at 13:26, 5.50s elapsed DNS resolution of 1 IPs took 19.20s. Mode: Async [#: 3, OK: 1, NX: 0, DR: 0, SF: 0, TR: 3, CN: 0] NSE: Script scanning 74.207.244.221. NSE: Starting runlevel 1 (of 1) scan. NSE: Starting http-robtex-shared-ns against scanme.nmap.org (74.207.244.221). Initiating NSE at 13:26 NSE: http-robtex-shared-ns against scanme.nmap.org (74.207.244.221) threw an error! C:\Program Files\Nmap/scripts\http-robtex-shared-ns.nse:54: attempt to index local 'data' (a nil value) stack traceback: C:\Program Files\Nmap/scripts\http-robtex-shared-ns.nse:54: in function 'parse_robtex_response' C:\Program Files\Nmap/scripts\http-robtex-shared-ns.nse:83: in function (...tail calls...) Completed NSE at 13:26, 0.43s elapsed Nmap scan report for scanme.nmap.org (74.207.244.221) Host is up, received reset (0.19s latency). Final times for host: srtt: 189000 rttvar: 189000 to: 945000 NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. Read from C:\Program Files\Nmap: nmap-payloads. Nmap done: 1 IP address (1 host up) scanned in 21.19 seconds Raw packets sent: 4 (152B) | Rcvd: 1 (40B) Command: nmap -sn -sP -d --privileged --script hostmap-robtex scanme.nmap.org Starting Nmap 6.47 ( http://nmap.org ) at 2014-10-01 13:31 RTZ 2 (ûõªþ) Winpcap present, dynamic linked to: WinPcap version 4.1.3 (packet.dll version 4.1.0.2980), based on libpcap version 1.0 branch 1_0_rel0b (20091008) --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. NSE: Script Arguments seen from CLI: NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating Ping Scan at 13:31 Scanning scanme.nmap.org (74.207.244.221) [4 ports] Packet capture filter (device eth0): dst host 192.168.2.199 and (icmp or icmp6 or ((tcp or udp or sc tp) and (src host 74.207.244.221))) We got a TCP ping packet back from 74.207.244.221 port 443 (trynum = 0) Completed Ping Scan at 13:31, 0.81s elapsed (1 total hosts) Overall sending rates: 4.92 packets / s, 186.96 bytes / s. mass_rdns: Using DNS server 8.8.8.8 mass_rdns: Using DNS server 8.8.8.8 mass_rdns: Using DNS server 192.168.0.1 Initiating Parallel DNS resolution of 1 host. at 13:32 mass_rdns: 19.04s 0/1 [#: 3, OK: 0, NX: 0, DR: 0, SF: 0, TR: 3] Completed Parallel DNS resolution of 1 host. at 13:32, 5.51s elapsed DNS resolution of 1 IPs took 19.04s. Mode: Async [#: 3, OK: 1, NX: 0, DR: 0, SF: 0, TR: 3, CN: 0] NSE: Script scanning 74.207.244.221. NSE: Starting runlevel 1 (of 1) scan. NSE: Starting hostmap-robtex against scanme.nmap.org (74.207.244.221). Initiating NSE at 13:32 NSE: hostmap-robtex against scanme.nmap.org (74.207.244.221) threw an error! C:\Program Files\Nmap/nselib/shortport.lua:200: attempt to index field 'version' (a nil value) stack traceback: C:\Program Files\Nmap/nselib/shortport.lua:200: in function (...tail calls...) C:\Program Files\Nmap/nselib/comm.lua:155: in function 'bestoption' C:\Program Files\Nmap/nselib/comm.lua:249: in function 'tryssl' C:\Program Files\Nmap/nselib/http.lua:1212: in function (...tail calls...) C:\Program Files\Nmap/nselib/http.lua:1480: in function (...tail calls...) C:\Program Files\Nmap/scripts\hostmap-robtex.nse:55: in function (...tail calls...) Completed NSE at 13:32, 0.01s elapsed Nmap scan report for scanme.nmap.org (74.207.244.221) Host is up, received reset (0.19s latency). Final times for host: srtt: 189000 rttvar: 189000 to: 945000 NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. Read from C:\Program Files\Nmap: nmap-payloads. Nmap done: 1 IP address (1 host up) scanned in 20.64 seconds Raw packets sent: 4 (152B) | Rcvd: 1 (40B) Command: nmap -sn -sP -d --privileged --script http-robtex-reverse-ip --script-args http-robtex-reverse-ip.host=74.207.244.221 Starting Nmap 6.47 ( http://nmap.org ) at 2014-10-01 13:37 RTZ 2 (ûõªþ) Winpcap present, dynamic linked to: WinPcap version 4.1.3 (packet.dll version 4.1.0.2980), based on libpcap version 1.0 branch 1_0_rel0b (20091008) --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. NSE: Script Arguments seen from CLI: http-robtex-reverse-ip.host=74.207.244.221 NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. NSE: Starting http-robtex-reverse-ip. Initiating NSE at 13:37 NSE: http-robtex-reverse-ip threw an error! C:\Program Files\Nmap/nselib/shortport.lua:200: attempt to index field 'version' (a nil value) stack traceback: C:\Program Files\Nmap/nselib/shortport.lua:200: in function (...tail calls...) C:\Program Files\Nmap/nselib/comm.lua:155: in function 'bestoption' C:\Program Files\Nmap/nselib/comm.lua:249: in function 'tryssl' C:\Program Files\Nmap/nselib/http.lua:1212: in function (...tail calls...) C:\Program Files\Nmap/nselib/http.lua:1480: in function (...tail calls...) C:\Program Files\Nmap/scripts\http-robtex-reverse-ip.nse:68: in function (...tail calls...) Completed NSE at 13:37, 0.01s elapsed NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. No data files read. WARNING: No targets were specified, so 0 hosts scanned. Nmap done: 0 IP addresses (0 hosts up) scanned in 0.55 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B) Kali Linux: Command: nmap -sn -sP -d --privileged --script http-robtex-shared-ns scanme.nmap.org Starting Nmap 6.47 ( http://nmap.org ) at 2014-09-12 20:55 EDT --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. NSE: Script Arguments seen from CLI: NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating Ping Scan at 20:55 Scanning scanme.nmap.org (74.207.244.221) [4 ports] Packet capture filter (device eth0): dst host 192.168.2.195 and (icmp or icmp6 or ((tcp or udp or sctp) and (src host 74.207.244.221))) We got a ping packet back from 74.207.244.221: id = 34355 seq = 0 checksum = 60772 Completed Ping Scan at 20:55, 0.21s elapsed (1 total hosts) Overall sending rates: 18.94 packets / s, 719.72 bytes / s. mass_rdns: Using DNS server 8.8.8.8 Initiating Parallel DNS resolution of 1 host. at 20:55 mass_rdns: 0.01s 0/1 [#: 1, OK: 0, NX: 0, DR: 0, SF: 0, TR: 1] Completed Parallel DNS resolution of 1 host. at 20:55, 0.01s elapsed DNS resolution of 1 IPs took 0.01s. Mode: Async [#: 1, OK: 1, NX: 0, DR: 0, SF: 0, TR: 1, CN: 0] NSE: Script scanning 74.207.244.221. NSE: Starting runlevel 1 (of 1) scan. NSE: Starting http-robtex-shared-ns against scanme.nmap.org (74.207.244.221). Initiating NSE at 20:55 NSE: http-robtex-shared-ns against scanme.nmap.org (74.207.244.221) threw an error! /usr/bin/../share/nmap/scripts/http-robtex-shared-ns.nse:54: attempt to index local 'data' (a nil value) stack traceback: /usr/bin/../share/nmap/scripts/http-robtex-shared-ns.nse:54: in function 'parse_robtex_response' /usr/bin/../share/nmap/scripts/http-robtex-shared-ns.nse:83: in function (...tail calls...) Completed NSE at 20:55, 0.41s elapsed Nmap scan report for scanme.nmap.org (74.207.244.221) Host is up, received timestamp-reply (0.19s latency). Final times for host: srtt: 191581 rttvar: 191581 to: 957905 NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. Read from /usr/bin/../share/nmap: nmap-payloads. Nmap done: 1 IP address (1 host up) scanned in 0.86 seconds Raw packets sent: 4 (152B) | Rcvd: 1 (40B) Command: nmap -sn -sP -d --privileged --script hostmap-robtex scanme.nmap.org Starting Nmap 6.47 ( http://nmap.org ) at 2014-09-12 20:57 EDT --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. NSE: Script Arguments seen from CLI: NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. Initiating Ping Scan at 20:57 Scanning scanme.nmap.org (74.207.244.221) [4 ports] Packet capture filter (device eth0): dst host 192.168.2.195 and (icmp or icmp6 or ((tcp or udp or sctp) and (src host 74.207.244.221))) We got a TCP ping packet back from 74.207.244.221 port 443 (trynum = 0) Completed Ping Scan at 20:57, 0.21s elapsed (1 total hosts) Overall sending rates: 19.30 packets / s, 733.36 bytes / s. mass_rdns: Using DNS server 8.8.8.8 Initiating Parallel DNS resolution of 1 host. at 20:57 mass_rdns: 0.01s 0/1 [#: 1, OK: 0, NX: 0, DR: 0, SF: 0, TR: 1] Completed Parallel DNS resolution of 1 host. at 20:57, 0.01s elapsed DNS resolution of 1 IPs took 0.01s. Mode: Async [#: 1, OK: 1, NX: 0, DR: 0, SF: 0, TR: 1, CN: 0] NSE: Script scanning 74.207.244.221. NSE: Starting runlevel 1 (of 1) scan. NSE: Starting hostmap-robtex against scanme.nmap.org (74.207.244.221). Initiating NSE at 20:57 NSE: hostmap-robtex against scanme.nmap.org (74.207.244.221) threw an error! /usr/bin/../share/nmap/nselib/shortport.lua:200: attempt to index field 'version' (a nil value) stack traceback: /usr/bin/../share/nmap/nselib/shortport.lua:200: in function (...tail calls...) /usr/bin/../share/nmap/nselib/comm.lua:155: in function 'bestoption' /usr/bin/../share/nmap/nselib/comm.lua:249: in function 'tryssl' /usr/bin/../share/nmap/nselib/http.lua:1212: in function (...tail calls...) /usr/bin/../share/nmap/nselib/http.lua:1480: in function (...tail calls...) /usr/bin/../share/nmap/scripts/hostmap-robtex.nse:55: in function (...tail calls...) Completed NSE at 20:57, 0.01s elapsed Nmap scan report for scanme.nmap.org (74.207.244.221) Host is up, received reset (0.19s latency). Final times for host: srtt: 188776 rttvar: 188776 to: 943880 NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. Read from /usr/bin/../share/nmap: nmap-payloads. Nmap done: 1 IP address (1 host up) scanned in 0.65 seconds Raw packets sent: 4 (152B) | Rcvd: 1 (40B) Command: nmap -sn -sP -d --privileged --script http-robtex-reverse-ip --script-args http-robtex-reverse-ip.host=74.207.244.221 Starting Nmap 6.47 ( http://nmap.org ) at 2014-09-12 21:00 EDT --------------- Timing report --------------- hostgroups: min 1, max 100000 rtt-timeouts: init 1000, min 100, max 10000 max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 parallelism: min 0, max 0 max-retries: 10, host-timeout: 0 min-rate: 0, max-rate: 0 --------------------------------------------- NSE: Using Lua 5.2. NSE: Script Arguments seen from CLI: http-robtex-reverse-ip.host=74.207.244.221 NSE: Loaded 1 scripts for scanning. NSE: Script Pre-scanning. NSE: Starting runlevel 1 (of 1) scan. NSE: Starting http-robtex-reverse-ip. Initiating NSE at 21:00 NSE: http-robtex-reverse-ip threw an error! /usr/bin/../share/nmap/nselib/shortport.lua:200: attempt to index field 'version' (a nil value) stack traceback: /usr/bin/../share/nmap/nselib/shortport.lua:200: in function (...tail calls...) /usr/bin/../share/nmap/nselib/comm.lua:155: in function 'bestoption' /usr/bin/../share/nmap/nselib/comm.lua:249: in function 'tryssl' /usr/bin/../share/nmap/nselib/http.lua:1212: in function (...tail calls...) /usr/bin/../share/nmap/nselib/http.lua:1480: in function (...tail calls...) /usr/bin/../share/nmap/scripts/http-robtex-reverse-ip.nse:68: in function (...tail calls...) Completed NSE at 21:00, 0.00s elapsed NSE: Script Post-scanning. NSE: Starting runlevel 1 (of 1) scan. No data files read. WARNING: No targets were specified, so 0 hosts scanned. Nmap done: 0 IP addresses (0 hosts up) scanned in 0.15 seconds Raw packets sent: 0 (0B) | Rcvd: 0 (0B)