Re: asa 5505 vpn ipsec l2l problem

[Eric Gearhart <eric () nixwizard net>]

On Fri, Oct 2, 2009 at 5:09 AM, Hrvoje Popovski <hrvoje () srce hr> wrote:

> hello eveyone,
>
> i have asa 5505 with Base license and 7.2.4 sofware.
>
> i'm trying to create l2l ipsec tunnel reading manual on
>
> http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/site2sit.html
>
> and when i'm applying acl in crypto map
> crypto map abcMap 1 match address acl
> i'm getting this log:
> Ignoring msg to mark SA with specified coordinates <abcMap, 1> dead
>
> i don't have any debug messages (debug crypto ipsec 100)
> google it but haven't found any answer.
>
> thank you for your answers!
>
> acl
> access-list acl extended permit tcp host 192.168.11.11 host 10.1.100.13 eq
> 4000
> access-list acl extended permit tcp host 192.168.11.11 host 10.1.110.250 eq
> 4000
> access-list acl extended permit tcp host 192.168.11.11 eq ftp host
> 10.1.100.105 eq ftp
> access-list acl extended permit tcp host 192.168.11.11 host 10.1.100.105 eq
> ftp-data
> access-list acl extended permit tcp host 192.168.11.12 host 10.1.100.13 eq
> 4000
> access-list acl extended permit tcp host 192.168.11.12 host 10.1.110.250 eq
> 4000
> access-list acl extended permit tcp host 192.168.11.12 host 10.1.100.105 eq
> ftp
> access-list acl extended permit tcp host 192.168.11.12 host 10.1.100.105 eq
> ftp-data


If you're not seeing IPsec build the tunnel with debug crypto, I would guess
that traffic is getting NAT'd out, and not hitting the tunnel (by the way,
you probably only need debug crypto ipsec 5, not 100...)


Do you have NAT setup on the 5505? If you do, do you have a NAT exclude ACL
setup that excludes "your device networks -> remote device networks"?

--
Eric

_______________________________________________
firewall-wizards mailing list
firewall-wizards () listserv icsalabs com
https://listserv.icsalabs.com/mailman/listinfo/firewall-wizards