nanog mailing list archives
RE: Router with 2 (or more) interfaces in same network
From: "Truman, Michelle, RTSLS" <mtruman () att com>
Date: Tue, 11 Nov 2003 10:00:42 -0500
Well you can do it if you are bridging... Michelle Truman CCIE # 8098 Principal Technical Consultant AT&T Solutions Center 651-998-0949 mtruman () att com -----Original Message----- From: Leo Bicknell [mailto:bicknell () ufp org] Sent: Tuesday, November 11, 2003 8:56 AM To: nanog () trapdoor merit edu Subject: Re: Router with 2 (or more) interfaces in same network In a message written on Tue, Nov 11, 2003 at 08:35:34AM +0000, Sugar, Sylvia wrote:
I am curious to know if its possible to have a router with its two
interfaces, say configured as,
1.1.1.1/16 and 1.1.1.2/16. Theoretically, i see nothing which can stop
a router from doing this.
Cisco's don't let you do this. I have always considered that broken,
although I'm sure Cisco thinks it's a feature. Other routers (of
note FreeBSD boxes) do this just fine. In almost all cases I've
seen it done it was for more bandwidth to the box (typically inbound
only, because there are no good tools on Unix boxes to split the
traffic between the outgoing interfaces). I've seen it done a lot in
labs where you have something like this:
client 1 | | client 5
client 2 +----B----+ client 6
client 3 | | client 7
client 4 | | client 8
| |
file-server-router-box
|
Internet
Where all the clients are in one subnet, there are two interfaces,
and the networks are separated (today the left and right groups on
two different switches, I drew the old school picture of thinwire
with a bridge in the middle.
While this will work (with some boxes, again Cisco's won't let you
configure the same subnet on two interfaces), it is at best a hack
that helps in some specific instances. It is quite clearly not good
network design. Maybe they have one of those specific instances
but I'd get a lot more detail and be sure before you offer up this
hack as otherwise you've got a messy config that didn't do what the
customer wanted anyway.
--
Leo Bicknell - bicknell () ufp org - CCIE 3440
PGP keys at http://www.ufp.org/~bicknell/
Read TMBG List - tmbg-list-request () tmbg org, www.tmbg.org
Current thread:
- Re: Router with 2 (or more) interfaces in same network, (continued)
- Re: Router with 2 (or more) interfaces in same network sthaug (Nov 11)
- Re: Router with 2 (or more) interfaces in same network Leo Bicknell (Nov 11)
- Re: Router with 2 (or more) interfaces in same network Neil J. McRae (Nov 12)
- Re: Router with 2 (or more) interfaces in same network Stephen J. Wilcox (Nov 12)
- RE: Router with 2 (or more) interfaces in same network Shawn Solomon (Nov 11)
- Re: Router with 2 (or more) interfaces in same network Paul S. Brown (Nov 11)
- RE: Router with 2 (or more) interfaces in same network Lucas Iglesias (Nov 11)
- Re: Router with 2 (or more) interfaces in same network Frank Louwers (Nov 11)
- RE: Router with 2 (or more) interfaces in same network Peter John Hill (Nov 11)
- RE: Router with 2 (or more) interfaces in same network Lucas Iglesias (Nov 11)
- RE: Router with 2 (or more) interfaces in same network Truman, Michelle, RTSLS (Nov 11)
- RE: Router with 2 (or more) interfaces in same network Michel Py (Nov 11)
- Re: Router with 2 (or more) interfaces in same network Stewart, William C (Bill), RTSLS (Nov 11)
