Re: Route server: Route-server.ip.att.net

[Mark Kamichoff <prox () prolixium com>]

On Fri, Nov 04, 2011 at 03:39:43PM -0500, Michael Sabino wrote:
> Could you give me the relevant configs explaining why when I
> traceroute to 12.83.43.9 on route-server.ip.att.net, the first hop is
> " j6300.cbbtier3.att.net (12.0.1.202)". However, when I type "show ip
> route 12.83.43.9", the RIB shows, "* 12.122.83.91, from 12.122.83.91,
> 7w0d ago".

A couple things here:

12.122.83.91 is the BGP next-hop in the RIB.  It needs to be resolved.
In this case it's being resolved via a /13 static route:

route-server>sho ip route 12.122.83.91
Routing entry for 12.120.0.0/13
  Known via "static", distance 1, metric 0
  Redistributing via bgp 65000
  Advertised by bgp 65000
  Routing Descriptor Blocks:
  * 12.0.1.1, via GigabitEthernet0/1
      Route metric is 0, traffic share count is 1

In real life it'd probably be resolved via an IGP such as OSPF or IS-IS,
but this is a route server, not a transit router.

So, the real next-hop is 12.0.1.1.  You can also verify this with the
following, since it's a Cisco box:

route-server>show ip cef 12.83.43.9  
12.0.0.0/9
  nexthop 12.0.1.1 GigabitEthernet0/1

However, you don't see 12.0.1.1 in the traceroute because it looks to be
the VRRP address of the Juniper J6300 upstream router (just judging by
the hostname):

route-server>sho arp 12.0.1.1
Protocol  Address          Age (min)  Hardware Addr   Type   Interface
Internet  12.0.1.1               81   0000.5e00.0101  ARPA
GigabitEthernet0/1

The MAC address is a giveaway that it's VRRP, since 00-00-5E-00-01 is
reserved by IANA for VRRP (IPv4 only):

http://tools.ietf.org/html/rfc5798#section-7.3

The Juniper router will send back ICMP TTL-exceeded messages from the
real IP on its interface, which appears to be 12.0.1.202.

Hope this helps.

- Mark

-- 
Mark Kamichoff
prox () prolixium com
http://www.prolixium.com/

Attachment: signature.asc
Description: Digital signature